Silent X-Stream™ Cabinet Enclosure Cooler For Electronic Control Panel Coolers
Silent X-Stream™ Cabinet Enclosure Cooler (Panel Coolers / Cooling Air Conditioner)- Frigid-X™ - Selection:
Silent X-Stream™ Cabinet enclosure coolers come with a 5 micron filter with an automatic drain for the compressed air supply to insure clean, dry air and an air distribution kit to circulate the cold air inside the enclosure for even cooling.
Silent X-Stream™ Cabinet enclosure coolers are available with or without thermostat control.
When constant cooling and a constant positive purge is required we recommend the continuous operating version without the thermostat and solenoid valve. The cooling effect can be controlled by adding a regulator in line to reduce pressure for reduced cooling when it is not required and to conserve energy.
Systems utilizing a thermostat and solenoid valve saves air by activating the air conditioner only when the internal temperature reaches a critical level. The adjustable thermostat is factory set at 95°F but can be readjusted on site.
Thermostat and solenoid valve systems are recommended where the heat load can fluctuate (such as for frequency drives) and where a continual purge is not required. The thermostat and solenoid "package" can also be added at a later date to a continuous system. An Electronic Thermostat System is also available replacing the thermostat and solenoid valve with a control box to “set” the temperature (ELC System).
If mounting cannot be on the top of the control panel an optional side mount is available Panel Coolers must be mounted vertical either at the top or at the side using the side mount. NOTE: If using the Side Mount you cannot utilize the Hot End Muffler – but you can still use the Cold End Muffler.
