• Search

Air-Blade, Air Knife, Air Knives, Stainless Steel Air Blade, Aluminum Air Knives, Air Knife Systems, Air Knives Systems

Model 10018 Standard Air-Blade™ Air Knife is used to blow scrap pieces and dirt from celluar phone parts after manufacturing.
(Fig. Air-Blade)

Air-Blade, Air Knife, Air Knives, Stainless Steel Air Blade, Aluminum Air Knives, Air Knife Systems, Air Knives Systems

(Fig. Stainless Steel Air Knife - Air-Blade™)

Why Choose US over Others?

  • Our aluminum air knives are anodized for longer life and superior quality over most competitors – two aluminum versions available gold color anodized for most applications and hard anodized for abrasive environments or where material may come in contact with the air knife.
  • Stainless steel shims are a standard when many competitors use plastic which can wear out quickly
  • Mounting holes for easy mounting without the need to dismantle the air knife
  • except for the smallest sizes, air inlet ports at the ends or the back allow for flexible air inlet choice, air use and high flow to higher force jets

 

Air-Blade, Air Knife, Air Knives, Stainless Steel Air Blade, Aluminum Air Knives, Air Knife Systems, Air Knives System, Air Knife Mounting System, Air Knife Mounting System Installation, Air Knife Accessories, Remove Oil Particular From a Compressed Air System, Calculating Compressed Air Consumption, Calculate Air Savings, Remove Water / Dirt / Rust From A Compressed Air System, Pressure Regulator

 

Standard Air-Blade™ Air Knife

Air-Blade™ - Air Knife X-Stream™ Specifications:

Air-Blade™ Air Knife is available in eight standard lengths:

  • 3" (76mm)
  • 6" (150mm)
  • 8" (203mm)
  • 12" (300mm)
  • 18" (457mm)
  • 24" (609.5mm)
  • 30" (761mm)
  • 36" (914mm)

Special lengths of our Air-Blade™ Air Knife are available on special order including lengths combining several units.

Air-Blade, Air Knife, Air Knives, Stainless Steel Air Blade, Aluminum Air Knives, Air Knife Systems, Air Knives Systems

(+) Larger Image

PART NO.
(Aluminum &
Stainless Steel)
AA
A
B
C
D
E
F
# of Rear Inlets
G
# of Side Inlets
Model 10003
Model 10003S
3"
76mm
0.6"
16mm
-
-
-
-
2.4"
60mm
0.3"
8mm
1
2
Model 10006
Model 10006S
6"
150mm
1.2"
30mm
-
-
-
-
4.7"
120mm
0.3"
8mm
1
2
Model 10008
8"
203mm
1.2"
30mm
-
-
-
-
6.8"
173mm
0.3"
8mm
1
2
Model 10012
Model 10012S
12"
300mm
1.0"
25mm
3.1"
8.0mm
8.7"
220mm
10.8"
275mm
0.3"
8mm
1
2
Model 10018
Model 10018S
18"
457mm
1.3"
33.5mm
5.8"
148.5mm
12.1"
308.5mm
16.7"
423.5mm
0.3"
8mm
2
2
Model 10024
Model 10024S
24"
609.5mm
1.3"
33.5mm
8.9"
225mm
15.2"
385mm
16.7"
423.5mm
0.3"
8mm
2
2
Model 10030
Model 10030S
30"
761mm
1.4"
35mm
8.9"
227mm
19.1"
485mm
28.6"
727mm
0.3"
8mm
2
2
Model 10036
Model 10036S
36"
914mm
1.4"
35mm
8.9"
227mm
27.1"
684mm
34.6"
879mm
0.3"
8mm
2
2

(Extra Middle mounting hole only on the 36" Air-Blade™ 457mm from each end)

Air-Blade™ Air Knife comes with a standard machined .002" outlet gap which will work for 90% of all applications encountered. If greater force is required, a .002" shim may be installed to open the gap for greater flow. Constructed in either coated aluminum or stainless steel.

Effective Length
Model Number
Materials Of Construction
3"
10003
Aluminum
3"
10003S
Stainless
6"
10006
Aluminum
6"
10006S
Stainless
8"
10008
Aluminum
12"
10012
Aluminum
12"
10012S
Stainless
18"
10018
Aluminum
18"
10018S
Stainless
24"
10024
Aluminum
24"
10024S
Stainless
30"
10030
Aluminum
30"
10030S
Stainless
36"
10036
Aluminum
36"
10036S
Stainless

Nex Flow™ Air Products Corp | Williamsville, New York | Richmond Hill, Ontario Nex Flow Air